Our available warehouse inventory
(clicking on a link will take you back to EX-FACTORY's website for information on a machine)

171 Machines Available
Filter by:  

 Brand / Model / Mach TypePrice
AC-011031
Year: 2002   FOB: MIDWEST
INGERSOLL RAND "TS-700 " AIR DRYER (REFRIGERATED)
700 SCFM Refrigerant Dryer, max. working pressure of 175 PSIG. ; Totally evironmentally friendly with R407C refrigerant uses 20% less energy ; Equ... [Read More]

Very good condition  

Why buy a new one when "one like this" is available immediately!
$7,500
AC-011038
Year:   FOB: MIDWEST
JOY TWISTAIR "TA-0290BA141IIJ " AIR COMPRESSOR (ROTARY SCREW)
60 HP Motor, rotary "TWISTAIR III" screw type compressor, 290 CFM output max. air at 110 PSI. ; Equipped with: Rotor coolant injection temperature ga... [Read More]

Requires repair  

A lot of machine & equipment value for the money!
$3,970
BB-010136
Year: NA   FOB: MIDWEST
VERVILLE "VP300 " 3-STATION VERTICAL SHAVINGS BALER
The VP-series Vertical Compression Balers are designed for packaging compressible bulk products such as natural or synthetic fibres. They have proven ... [Read More]

Reconditioned  

A machine in this condition and specification is hard to find!
$69,500
BH-010322
Year:   FOB: MIDWEST
OLIVER "81 " BORING (HORIZONTAL)
Single-spindle Horizontal Borer with chucking heads, 5 HP direct drive motor. ; Equipped with: Magnetic start/stop motor controls, safety foot stop s... [Read More]

Fair Condition  

At 10 cents/dollar, a really great Horizontal Borer; currently setup for single-end chucking!
$1,090
CR-010867
Year: 2000   FOB: NORTHEAST
TAYLOR "800183 " HYDRAULIC UNIT
Hydraulic unit from a TAYLOR 60-Section fully Automatic Clamp. ; 10 HP Pump with reservoir and model "RM-19-96510" heat exchanger. ; Was purchased i... [Read More]

Very good condition  

Nice Hydraulic unit for a special project!
$1,750
CR-010884
Year: 2004   FOB: MIDWEST
QUICK "30 SECTION-A " CLAMP CARRIER (AUTOMATIC)
30-Section Clamp Carrier with: 8-1/2' Width cap.; (92) total Heavy Duty zinc plated "quick-adjusting" clamps, 32" opening on clamps; jaw sizes of clam... [Read More]

Cleaned and checked  

Don't see many QUICK Automatics, and this is a 30-Section!
$23,500
CF-010712
Year:   FOB: MIDWEST
LANCASTER "220-B " DRAWER CLAMP
60" Opening, 13" wide x 24" high jaw, manual double screw setup, pressure supplied by (1) 8" bore x 3" stroke air cylinder. ; Each jaw with lower sup... [Read More]

Good condition  

American made equipment at an affordable price!
$1,180
BP-011792
Year: 1998   FOB: MIDWEST
MORBIDELLI "AUTHOR 700 " CNC MACHINING CENTER (W/ATC)
Working cap.: X-Axis is 126" (3,200 mm), Y-axis 66.9" (1,500 mm) when routing, Z-axis 7.1" (180 mm); positioning speed on X- & Y-axis 262 FPM. YASKAWA... [Read More]

Good condition  

A 5' plus Y-Axis and one of MORBIDELLI's "True Workhorses"; ...inspect in EXF's Zeeland Warehouse!
$18,500
RL-010491
Year: 2007   FOB: MIDWEST
CAM-WOOD "WR 203 " CNC ROUTER
Material processing dimensions of 23.6" x 35.4" x 3.9". ; Fixed universal aluminum T-slot table for simple clamping of workpiece to machine. ; Movin... [Read More]

Like New  

A CNC Router that is rugged and fast; ...ideal for small workpieces that need CNC precision without breaking into your big machines' time.

This 2'x 3' cap. router is small enough to fit almost anywhere, and it's Single-Phase power!

$9,450
RL-010501
Year: 1991   FOB: MIDWEST
CMS "PF 1-4T " CNC ROUTER (MULTIPLE HEADS)
96" x 48" Moving table, stationary bridge machine in a left-to-right configuration with a phenolic two zone vacuum plenum. ; Equipped with: (4) 10 HP... [Read More]

Good condition  

This is an older machine, but in great condition
$29,500
 
Return to EX-FACTORY